If you are shopping for a storage building and wondering whether you need a permit, here is the short version: Texas has no statewide shed permit law. The decision belongs to your city or county, and the answer genuinely differs from one Texas town to the next. The "200 square feet" figure you have probably read is a building-code default, not a state rule, and Texas cities amend it in both directions.
That means the only reliable answer is a local one. What follows is what actually drives the decision, why two Texas cities can answer the same question oppositely, and the exact questions to ask before you buy.
Most Texas cities build their permitting rules on the International Residential Code, which exempts small detached accessory structures from needing a building permit. Cities then adopt that code and amend it however they see fit. There is no Texas statute that sets a single statewide threshold.
So when someone tells you "sheds under 200 square feet never need a permit," they are quoting a code default that their city may or may not have kept.
The clearest way to see this is to read what two Texas cities actually publish.
The City of Austin exempts from a building permit:
"A one-story detached accessory structure that is no more than 200 square feet (18.58 m2) of floor area, no more than 15 feet (4,572 mm) in height, does not create a dwelling, contains no plumbing, and is not located within a flood hazard area."
The Town of Prosper takes the opposite position:
"All accessory buildings, regardless of square footage, require a permit to ensure they meet the minimum setback requirements and are constructed in a safe manner."
Same state, same question, opposite answers. In one city a 200-square-foot building is exempt; in the other, a four-by-four garden box needs paperwork. Reported thresholds across Texas run from roughly 120 square feet up to about 300, and some cities require a permit at any size.
Notice how much Austin's exemption asks for beyond square footage. A building can be under the size limit and still require a permit by failing any one of the other conditions.
The first question, but not the only one. Know your building's exact footprint in square feet before you call anyone.
How the building sits on the ground matters. A structure set on skids or blocks is treated differently from one anchored to a poured concrete slab, because a permanent foundation reads as a permanent improvement to the property.
Austin's exemption applies only to structures that contain no plumbing. Running electricity to a building is also typically its own permit, separate from the structure. If you are planning a workshop with lights and outlets, or a studio with a sink, assume the electrical or plumbing work needs a permit even if the building itself does not.
This is the one that catches people. Even when a building is exempt from a building permit, it still has to obey zoning: how far it sits from property lines, how tall it stands, and how much of your lot is covered. Both Austin and Prosper say so explicitly. Exempt from a permit does not mean exempt from the rules.
Placement also affects flood hazard areas. Austin's exemption disappears entirely if the structure sits in one.
The moment a building becomes a dwelling, it leaves the accessory-structure category and enters a different regulatory world with its own codes and inspections. This is the single biggest source of confusion, because a cabin shell and a storage shed can look similar on a lot and be treated nothing alike on paper. If you are thinking about a tiny home or cabin, that is a separate question from this one.
If your city kept the 200-square-foot default, here is roughly where common sizes land:
| Size | Square feet | Against a 200 sq ft threshold |
|---|---|---|
| 10 × 12 | 120 | Comfortably under |
| 10 × 20 | 200 | Exactly on the line |
| 12 × 24 | 288 | Over |
| 14 × 32 | 448 | Well over |
A 10 × 20 sitting precisely at 200 square feet is worth a phone call rather than an assumption. And if your city never adopted the 200-square-foot default, this table tells you nothing useful, which is the whole point.
A permit and an HOA approval are two different things, and clearing one does not clear the other. An HOA can restrict a building's size, siding color, roof style, or placement in a neighborhood where the city requires no permit at all. If you are in a deed-restricted subdivision, check your covenants at the same time you call the city.
One call answers this properly. Have your building's dimensions and a rough idea of where it will sit, then ask:
Write down who you spoke with and when. Rules change, and a name and a date are worth having.
Knowing your local rules before you order saves the frustrating version of this: a building that arrives and cannot legally sit where you planned. Getting your site prepared and understanding how delivery works are the other two pieces of the same puzzle, since setbacks affect both where a building can sit and whether a truck can reach the spot.
Quality Storage Buildings has been building in Texas since 1996, and we have talked a lot of customers through this exact question. Come see the storage buildings in person at any of our three Texas locations:
One thing to be clear about: we do not pull permits for customers. That has to be done by the property owner, because the permit attaches to your property and your name. What we do is give you everything you need to make the call short — exact dimensions, how the building sits on the ground, and what it is built from. Bring those three things to your permit office and the conversation is usually a quick one.
We also cannot tell you what your city requires, and anyone who says they can without knowing your address is guessing. What we can do is help you match a building to the space you have, and make sure you know what to ask before you order.
No. Texas has no statewide shed permit law. Permitting is set by your city or county, which is why the answer changes depending on where you live and even whether your address falls inside city limits.
It depends entirely on your jurisdiction. Many Texas cities follow the International Residential Code default that exempts one-story detached accessory structures up to 200 square feet, but some set the line lower and others require a permit at any size. Confirm your own city's threshold before ordering.
Foundation type can change the answer. A building on skids or blocks is often treated differently from one anchored to a permanent slab, because a permanent foundation reads as a permanent improvement. Ask your permit office specifically about foundation type, since this varies locally.
Usually yes, and separately from the structure itself. Electrical work typically requires its own permit and inspection even when the building is exempt. Austin's exemption also applies only to structures containing no plumbing.
Yes. HOA covenants operate independently of city permitting. An HOA can restrict size, placement, siding color, or roof style even where no permit is required, so check your deed restrictions alongside your city's rules.
No. The permit has to be pulled by the property owner, because it attaches to your property and your name. What we provide is the information your permit office will ask for: exact dimensions, how the building sits on the ground, and what it is built from.